Auto Iris Setting - Panasonic AK-HRP1010G Operating Instructions Manual

AUTO IRIS SETTING

The setting values will vary also depending on the connected camera.
Items with the function disabled are indicated by "-".
For details on each setting item, check also the operating instructions of the camera and CCU to be connected.
Item
WINDOW SELECT
PEAK RATIO
IRIS GAIN
IRIS SPEED
IRIS LEVEL
IRIS RANG
LENS EXT COMP SW
LENS EXT COMP LV
C 0 1 : A K - U C 4 0 0 0
A U T O I R I S S E T T I N G
WINDOW PEAK
SELECT RATIO
FULL 50
IRIS IRIS
GAIN SPEED
LENS 15
LENS EXT LENS EXT
COMP SW COMP LV
OFF 0
Set the photometry range.
Set the ratio between the peak value and average value for auto iris photometry.
Switch between adjusting the auto iris photometry speed via the iris gain volume or via menu
operations. Set this to "LENS" under normal circumstances, and adjust using the lens iris
volume.
Set the auto iris speed.
Adjusts the target value (brightness) of the auto iris.
Set the auto iris level fine adjustment range for the [IRIS] lever.
Enable ALC correction when the lens extender is enabled.
Set the ALC correction level when the lens extender is enabled.
- 106 -
1 / 1
IRIS IRIS
LEVEL RANG
+50 NORMAL
Setting details
ROP menu