Toshiba G3 Workbook page 34

Additional Super User Programming
KEYSTROKE
LOCAL/REMOTE
READ/WRITE
READ/WRITE hold down
LOCAL/REMOTE
Down Arrow
READ/WRITE
Up Arrow Until
READ/WRITE
ADJUST
READ/WRITE
PRG
Cycle power to the drive after programming
** Super User Mode involves accessing the machine code of the inverter, hence the
unusual names for the parameters. Extreme caution should be used whenever this mode of
programming is utilized. Severe damage and/or failure of the ASD can be attained by not
following the instructed use exactly. Remember - this is a software controlled digital
device. You need only be off by 1 to be 100% incorrect.
For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-
RESULTING DISPLAY
OUTPUT FREQUENCY
OUTPUT FREQUENCY
OUTPUT FREQUENCY
SUPER USER
RAMF
EEP
0380
03B3
68
SEE ValueChart above
03B3 alternating with value, then 03B3
OUTPUT FREQUENCY
2192
0.0 Hz
0.0 Hz
0.0 Hz
0.0 Hz
34