Installation Of Power Cable Clamp Plates - ABB ACSM1 Hardware Manual

50

Installation of power cable clamp plates

Two identical power cable clamp plates are included with the regen supply module.
The picture below depicts a frame size A regen supply module; the installation is
similar with other frame sizes.
Note: Pay attention to supporting the cables adequately within the installation
enclosure especially if not using the cable clamps.
Electrical installation
Frames A and B: 1.5 N·m (13 lbf·in)
Frames C and D: 3 N·m (25 lbf·in)
1.5 N·m (13 lbf·in)