Table of Contents
Advertisement
•
The charger is for use on only nominal 120 to
240 VAC operation. For use with 240 V circuits,
contact your Authorized Service Dealer for the
correct power cord.
•
Do not charge a frozen battery.
•
Do not abuse the cord. Do not yank on the power
supply cord to disconnect the charger from the
receptacle. Keep the cord from heat, oil, and
sharp edges.
•
Connect the charger directly to a grounding
receptacle. Do not use the charger on an
ungrounded outlet, even with a grounding adapter.
•
Do not alter the provided power cord or plug.
•
Remove metal items such as rings, bracelets,
necklaces, and watches when working with a
lithium-ion battery. A lithium-ion battery can
produce enough current to cause a severe burn.
•
Never operate the charger without good visibility
or light.
•
Use an extension cord capable of handling 15 A
or more. If you are charging outdoors, use an
extension cord rated for outdoor use.
•
If the power supply cord is damaged while it is
plugged in, disconnect the cord from the wall
receptacle and contact an Authorized Service
Dealer for a replacement.
•
Unplug the charger from the electrical outlet when
not in use, before moving it to another location, or
prior to servicing it.
•
Do not disassemble the charger. Take the charger
to an Authorized Service Dealer when service or
repair is required.
•
Unplug the power cord from the outlet before
starting any maintenance or cleaning to reduce
risk of electric shock.
•
Maintain or replace safety and instruction labels
as needed.
•
Do not operate the charger with a damaged cord
or plug. Contact an Authorized Service Dealer to
obtain a replacement cord.
•
If the charger has received an impact, been
dropped, or otherwise damaged, do not use it;
take it to an Authorized Service Dealer.
Moving a Non-Functioning
Machine
In an emergency, you can push or tow the machine.
WARNING
The wheels will spin freely once the gear is
removed; the machine could unintentionally
move and injure you or bystanders.
Do not move the machine on slopes and
install the gear after moving the machine.
1.
Shut off the machine and remove the key.
2.
Remove the 2 screws and the cover from the
gearbox.
3.
Remove the gear from the gearbox.
4.
Repeat the procedure for the other 3 gearboxes.
21
Figure 18
Figure 19
g392174
g392587
Advertisement
Table of Contents
