Table of Contents
Advertisement
Maintenance
Note:
Determine the left and right sides of the
machine from the normal operating position.
Maintenance Safety
CAUTION
If you leave the key in the switch, someone
could accidently start the machine and
seriously injure you or other bystanders.
Remove the key from the switch before you
perform any maintenance.
•
Park the machine on a level surface, disengage
the auxiliary hydraulics, lower the attachment,
ensure that the parking brake is engaged, shut
off the machine, and remove the key. Wait for all
movement to stop and allow the machine to cool
before adjusting, cleaning, storing, or repairing it.
•
Do not allow untrained personnel to service the
machine.
•
Use jack stands to support the components when
required.
•
Carefully release pressure from components
with stored energy; refer to
Pressure (page
33).
•
Disconnect the battery before making any repairs;
refer to
Using the Battery-Disconnect Switch (page
29).
•
Keep your hands and feet away from the moving
parts. If possible, do not make adjustments with
the machine running.
•
Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.
•
Do not tamper with the safety devices.
•
Use only Toro-approved attachments.
Attachments can change the stability and the
operating characteristics of the machine. You may
void the warranty if you use the machine with
unapproved attachments.
•
Use only genuine Toro replacement parts.
•
If any maintenance or repair requires the loader
arms to be in the raised position, secure the arms
in the raised position with the hydraulic-cylinder
lock(s).
Relieving Hydraulic
25
Advertisement
Table of Contents
