Toro e-Dingo 500 Operator's Manual page 8

1. Read the Operator's Manual before connecting or
disconnecting the auxiliary hydraulic couplers—1) Turn and
hold the key in the auxiliary hydraulic relief position and press
the auxiliary-hydraulic control switch back and forth to relieve
hydraulic pressure; 2) Connect or disconnect the auxiliary
hydraulic couplers.
2. Off
3. On
4. Auxiliary hydraulic relief position
5. Warning—read the Operator's Manual.
6. Warning—receive training before operating the machine.
7. Warning—wear hearing protection.
145-2442
8. Tipping hazard—do not make fast turns; always check behind
you before reversing the machine.
9. Explosion hazard; electrocution hazard—call the local utilities
hotline before beginning work in an area.
10. Warning—keep away from the attachment when operating the
machine; keep bystanders away from the machine.
11. Cutting/severing hazard of hand or foot—wait for all moving
parts to stop before servicing; keep away from moving parts;
keep all guards and shields in place.
12. Tipping hazard—do not step off the operator platform with the
load raised; do not drive the machine with the load raised;
always move up or down slopes with the attachment lowered;
never drive on a slope with the attachment raised; always
operate with the heavy end uphill; always carry loads low;
never jerk the control levers; use a steady, even motion.
13. Warning—engage the parking brake, lower the attachment to
the ground, shut off the machine, and remove the key from
the key switch before leaving the machine.
8
decal145-2442