Table of Contents
Advertisement
Controls System
Maintenance
Adjusting the Controls
The factory adjusts the controls before shipping the
machine. However, after many hours of use, you
may need to adjust the traction control alignment,
the N
position of the traction control, and the
EUTRAL
tracking of the traction control in the full forward
position.
Contact your Authorized Service Dealer to adjust the
controls of your machine.
Hydraulic System
Maintenance
Hydraulic System Safety
•
Seek immediate medical attention if fluid is injected
into skin. Injected fluid must be surgically removed
within a few hours by a doctor.
•
Ensure that all hydraulic-fluid hoses and lines are
in good condition and all hydraulic connections
and fittings are tight before applying pressure to
the hydraulic system.
•
Keep your body and hands away from pinhole
leaks or nozzles that eject high-pressure hydraulic
fluid.
•
Use cardboard or paper to find hydraulic leaks.
•
Safely relieve all pressure in the hydraulic system
before performing any work on the hydraulic
system.
Relieving Hydraulic
Pressure
To relieve hydraulic pressure while the machine
is on, disengage the auxiliary hydraulics and fully
lower the loader arms. Turn the key switch to the
A
UXILIARY HYDRAULIC RELIEF
auxiliary-hydraulic switch back and forth.
33
position and press the
Figure 36
g393575
Advertisement
Table of Contents
