Selecting The Data Format; Selecting The Scan Quality Setting - Epson AcuLaser CX37DN Series User Manual

Note:
If the edited group dial destination is registered in the favorite list, a confirmation message asking
whether or not to keep the destination registered as it is appears after the operation in step 12 is
performed. To keep the destination registered as it is, select YES. To cancel the registration, select
NO.

Selecting the Data Format

The data format for the scanned image can be selected.
1. In the main screen (Scan mode), press the u or d key to select the current data format setting, and
then press the Select key.
2. Press the u or d key to select TIFF, PDF or JPEG, and then press the Select key.
The main screen (Scan mode) appears again.
Note:
❏ If SIMPLEX/DUPLEX is set to 2-SIDE, only PDF appears. In addition, if BW Only was selected for
the color setting, JPEG does not appear.
❏ PDF data can be opened in Adobe Acrobat Reader.
❏ TIFF files of images that have been scanned with the COLOR or GRAY setting cannot be opened
with the Windows Picture and FAX Viewer, which is included with Windows XP as a standard
component. These files can be opened with image-processing applications such as PhotoShop,
Microsoft Office Document Imaging or ACDsee.

Selecting the Scan Quality Setting

The resolution, scan mode and density appropriate for the scanned image can be selected.
Selecting the Resolution
1. In the main screen (Scan mode), press the u or d key to select the current scan quality setting, and
then press the Select key.
2. Press the u or d key to select RESOLUTION, and then press the Select key.
3. Press the u or d key to select 150x150dpi or 300x300dpi and then press the Select key.
The main screen (Scan mode) appears again.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User's Guide
Using the Scanner 162