Epson AcuLaser CX37DN Series User Manual page 51

SLEEP MODE
LANGUAGE
INITIAL MODE (Epson AcuLaser CX37DNF on‐
ly)
REPLACE TONER
ENABLE WARNING TONER LOW
P/U LOW
WASTE NEAR FULL
AUTO CONTINUE
Epson AcuLaser CX37 Series
Settings
3-120 min (Default: 15 min)
Enters Energy Save mode in order to conserve energy when no oper‐
ation is performed. Specify the length of time in minutes until the
machine enters Energy Save mode.
Settings ENGLISH / French / German / Italian /
Spanish / Brazilian / Portuguese / Russian /
Czech / Slovak / Hungarian / Polish / Dutch /
Danish / Norwegian / Swedish / Finnish /
Turkish / Catalan
Select the language of the menus and messages that appear in the
message window.
Settings
COPY / FAX / SCAN
Select the mode that the machine starts up in or returns to after the
automatic reset.
Settings STOP / BW CONTINUE
Select whether or not printing, copying and faxing (for Epson AcuLaser
CX37DNF) stop when the toner has run out.
STOP: Printing, copying and faxing (for Epson AcuLaser CX37DNF) stop
when the toner has run out.
BW CONTINUE: Monochrome printing, monochrome copying and fax
reception (for Epson AcuLaser CX37DNF) can continue when one or
more color toners run out while black toner still remains.
Settings ON / OFF
When the toner is nearly run out, a warning message appears.
Settings ON / OFF
When the photoconductor unit is nearly run out, warning message
appears.
Settings ON / OFF
When the waste toner bottle is nearly full, a warning message appears.
Settings ON / OFF
Select whether or not printing continues when a size error occurs
during printing.
Control Panel and Configuration Menu
Printer/Copier/Scanner User's Guide
51