Epson AcuLaser CX37DN Series User Manual page 190

❏ Always close the machine's covers gently. Never subject the machine to vibration.
❏ Do not cover the machine immediately after using it. Turn it off and wait until it cools down.
❏ Do not leave the machine's covers open for any length of time, especially in well-lit places; light
may damage the photoconductor units.
❏ Do not open the machine during printing.
❏ Do not tap media stacks on the machine.
❏ Do not lubricate or disassemble the machine.
❏ Do not tilt the machine.
❏ Do not touch the electrical contacts, gears, or laser devices. Doing so may damage the machine and
cause the print quality to deteriorate.
❏ Keep media in the output tray at a minimum level. If the media is stocked too high, your machine
may experience media misfeeds and excessive media curl.
❏ Make sure two people are available to lift the machine when moving it.
Keep the machine level to avoid toner spillage.
❏ When lifting the machine, fold up Tray 1, and then lift the machine as shown in the illustration.
❏ If the optional 500-Sheet Paper Cassette Unit is installed, move it and the machine separately. Do
not grasp the grip of Tray 3, or the right side cover; otherwise, the 500-Sheet Paper Cassette Unit
may be damaged.
❏ If you get toner on your skin, wash it off with cool water and a mild soap.
Caution:
c
If you get toner in your eyes, wash it out immediately with cool water and consult a doctor.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User's Guide
Maintenance 190