User's Guide
Note:
Put the used cutter in a bag or the like, and
dispose of it in accordance with local
regulations.
I
Take the new paper cutter out of the
package and insert it as shown.
Fully insert the cutter in alignment with the
guide. Attach it properly so that the spring
incorporated in the cutter holder does not
pop out.
J
Push in the side pin while turning the paper
cutter cover to the left to close the casing.
K
Close the front cover.
The cutter holder moves to the home (far
right) position.
Note:
Depending on the environment, the print head
nozzles may dry and clog while replacing the
cutter. After replacing the cutter, print a
nozzle check pattern to confirm the nozzles are
not clogged.
See "Nozzle check" on page 132.
Maintenance
130