Epson Stylus Pro 11880 User Manual page 150

User's Guide
Error messages
LEVER RELEASED
LOWER THE PAPER SET LEVER
LEVER RELEASED
LOAD PAPER
FRONT COVER OPEN
CLOSE FRONT COVER
INK COVER OPEN
CLOSE RIGHT AND LEFT INK
COVERS
INK COVER OPEN
CLOSE RIGHT INK COVER
INK COVER OPEN
CLOSE LEFT INK COVER
NOT ENOUGH CAPACITY
REPLACE THE RIGHT SIDE
MAINTENANCE TANK
NOT ENOUGH CAPACITY
REPLACE THE CENTER REAR
MAINTENANCE TANK
NOT ENOUGH CAPACITY
REPLACE THE LEFT SIDE
MAINTENANCE TANK
NOT ENOUGH INK
REPLACE INK CARTRIDGE WITH A
NEW ONE
MAINT TANK ERROR
REPLACE THE RIGHT SIDE
MAINTENANCE TANK
MAINT TANK ERROR
REPLACE THE CENTER REAR
MAINTENANCE TANK
MAINT TANK ERROR
REPLACE THE LEFT SIDE
MAINTENANCE TANK
MAINTENANCE
PLEASE USE GENUINE EPSON
MAINT TANK
MAINTENANCE
NON-GENUINE MAINT TANK MAY
NOT PERFORM AT OPTIMUM.
CONTINUE?
<YES NO>
Description
The paper lever is in
the released position.
The front cover is open.
The ink cover(s) is
open.
The maintenance tank
is almost full.
The ink cartridge is
nearly expended.
The maintenance tank
is not correctly set in
the printer.
Non-genuine
maintenance tank is
installed.
Non-genuine
maintenance tank is
installed.
What to do
Move the paper lever to the secured position.
Close the front cover.
Close the ink cover(s).
Replace the target maintenance tank with a
new one.
See "Replacing the Maintenance Tank"
on page 127.
Replace the ink cartridge with a new one.
See "Replacing Ink Cartridges" on page
122.
Replace the maintenance tank.
See "Replacing the Maintenance Tank"
on page 127.
Replace the maintenance tank with a
genuine Epson cartridge.
See "Replacing the Maintenance Tank"
on page 127.
Select NO (press the button) to replace the
maintenance tank with a genuine Epson
maintenance tank.
See "Replacing the Maintenance Tank"
on page 127.
Problem Solver 150