User's Guide
HEAD ALIGNMENT
You can perform print head alignment. For more details for the print head alignment, see the following
section.
"Print head alignment" on page 138
Item
PAPER THICKNESS
ALIGNMENT
NETWORK SETUP
This menu contains the following items. For detailed information about network settings, see the
Administrator's Guide.
Item
NETWORK SETUP
IP ADDRESS SETTING
IP, SM, DG SETTING
BONJOUR
INIT NETWORK SETTING
Parameter
SELECT PAPER TYPE
SELECT THICKNESS
AUTO
MANUAL
Parameter
DISABLE
ENABLE
AUTO
PANEL
Ask your system administrator for detailed information.
ON
OFF
EXECUTE
Explanation
When using Epson special media, select the paper
type. If you use non-Epson special media, enter the
paper thickness in the range of 0.1 to 1.5 mm.
When you select AUTO, the adjustment pattern for
output is read by the sensor and the optimum
adjustment value is registered automatically in the
printer. When you select MANUAL, you need to check the
pattern and enter the value for alignment.
Explanation
You can configure the network setting of the printer. The
following items appear only when ENABLE is selected.
After setting the items, press the
Network Setup menu, so the network is reset and the
network connection is available after 15 seconds. The
Network Setup menu does not appear while resetting
the network.
You can select the method to set the IP address to the
printer. When you select PANEL, IP, SM, DG SETTING
appears.
You can enable or disable the Bonjour setting.
You can return the network settings of the printer to the
factory default value.
button in the
The Control Panel
26