Epson Stylus Pro 11880 User Manual page 25

User's Guide
CUSTOM PAPER
When using the non-Epson media, you need to make the settings suitable for the media.
After you have selected the paper number, make the following settings.
To set the custom paper, see the following section.
"Setting the custom paper in the printer" on page 100
Item
PAPER TYPE
PLATEN GAP
THICKNESS PATTERN
CUT METHOD
PAPER FEED ADJUST
DRYING TIME
PAPER SUCTION
Parameter
Photo Paper
Proofing Paper
Fine Art Paper
Matte Paper
Plain Paper
Others
NARROW
STANDARD
WIDE
WIDER
WIDEST
PRINT
STANDARD
THIN PAPER
THICK PAPER, FAST
THICK PAPER, SLOW
0.00%
-0.70% to +0.70%
0.0 SEC
0.0 SEC to 10.0 SEC
STANDARD
-1 to -4
Explanation
You can select the media type.
You can adjust the distance between the print head
and paper.
STANDARD: Normally, select STANDARD.
NARROW: Use this when printing on thin paper.
WIDE or WIDER: Select this if you find that printed images
are smeared.
WIDEST: Use this when printing on thick paper.
You can print the paper thickness detection pattern.
You can specify a cutting method.
You can set the paper feed amount of the printable
area. The range is -0.70 to 0.70%. If the paper feed value
is too large, white horizontal micro-banding may
appear. If the paper feed value is too small, dark
horizontal micro-banding may appear.
You can set the ink drying time for each print head
pass. The range is 0 to 10 seconds. Depending on the
ink density or paper type, the ink does not dry soon. In
this case, set the drying time longer.
You can set the suction pressure used to feed the
printed paper.
The Control Panel 25