Epson Stylus Pro 11880 User Manual page 24

User's Guide
Item
ROLL PAPER
REMAINING
*This menu does not
appear when the
paper is loaded in the
printer.
CUSTOM PAPER
Parameter
REMAINING PPR SETUP
ROLL PAPER LENGTH
ROLL LENGTH ALERT
PAPER NO.1 - 10
Explanation
You can set a paper remaining counter function only if
the paper is not loaded in the printer.
❏
OFF:
The ROLL PAPER REMAINING function is disabled.
The Roll Paper Counter icon does not appear on
the LCD panel.
❏
ON: PRINT EVERY PAGE:
The remaining amount of the roll paper is displayed
on the LCD panel. At the end of the print job, the
barcode (including the paper type, the roll paper
length, and the roll length alert value information) is
printed on the roll paper edge. When the printer is
turned on or the roll paper is set in the printer, the
barcode is scanned.
❏
ON: AT ROLL EXCHANGE:
The remaining amount of the roll paper is displayed
on the LCD panel. When this setting is selected, the
paper lever is locked. When you press and hold the
button for 3 seconds, the barcode (including
the paper type, the roll paper length, and the roll
length alert value information) is printed on the roll
paper edge and then the paper lever is released.
When the printer is turned on or the roll paper is set
in the printer, the barcode is scanned.
You can get a message when there is not much paper
left, by setting the roll alert.
When using roll paper, enter the length of the roll paper
set in the printer and the alert value. You can set the roll
paper length from 5.0 to 99.5 m, and the roll length alert
from 1 to 15 m.
You can select a number (between 1 to 10) to register
the settings (such as Paper Type, Platen Gap, Thickness
Pattern, Cut Method, Paper Feed Adjust, Drying Time,
Paper Suction) or to recall these settings you have
made.
The number you select here is displayed on the LCD
panel.
See "CUSTOM PAPER" on page 25.
The Control Panel 24