Preparations And Webui Login - Huawei LUNA2000-2.0MWH-1H0 User Manual

LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual
A.2.1 Preparations and WebUI Login
Prerequisites
●
●
Procedure
Step 1 Connect the network cable between the network port of the PC and the WAN or
LAN port of the SmartLogger.
Step 2 Set the IP address for the PC on the same network segment as the SmartLogger IP
address.
Connected
Port
LAN port
WAN port
Step 3 Set LAN parameters.
● If the SmartLogger is connected to a local area network (LAN) and a proxy
● If the SmartLogger is connected to the Internet and the PC is connected to the
1.
Issue 02 (2021-11-15)
The operating system of Windows 7 or later is supported.
Browser: Chrome 52, Firefox 58, or Internet Explorer 9, or a later version is
recommended.
Item
IP address
Subnet mask
Default gateway
IP address
Subnet mask
Default gateway
NO TE
● When the IP address of the WAN port is in the network segment from 192.168.8.1 to
192.168.8.255, set the default gateway to 192.168.8.1 and the IP address of the LAN
port to 192.168.3.10. If the connected port is a LAN port, you need to adjust the
network configuration of the PC.
● It is recommended that the PC be connected to the LAN port of the SmartLogger or the
GE port of the SmartModule. When the PC is connected to the GE port of the
SmartModule, adjust the network configuration of the PC to the configuration mode
when the PC is connected to the LAN port of the SmartLogger.
NO TICE
server has been set, you need to cancel the proxy server settings.
LAN, do not cancel the proxy server settings.
Open Internet Explorer.
Copyright © Huawei Technologies Co., Ltd.
A Operations on the CMU WebUI
SmartLogger
Default Value
192.168.8.10
255.255.255.0
192.168.8.1
192.168.0.10
255.255.255.0
192.168.0.1
Example PC
Setting
192.168.8.11
255.255.255.0
192.168.8.1
192.168.0.11
255.255.255.0
192.168.0.1
174