Huawei LUNA2000-2.0MWH-1H0 User Manual page 189

LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual
Figure B-1 Requirements for OT/DT terminals
Crimping an OT or DT Terminal
● Avoid damaging the core wire when stripping a cable.
● The cavity formed after the conductor crimp strip of the OT or DT terminal has
● Wrap the wire crimping area with heat-shrink tubing or insulation tape. The
● Use a heat gun carefully to avoid heat damage to the equipment.
Issue 02 (2021-11-15)
NO TICE
been crimped must wrap around the core wires completely. The core wires
must be in close contact with the OT or DT terminal closely.
heat-shrink tubing is used in this section as an example.
Copyright © Huawei Technologies Co., Ltd.
B Crimping an OT or DT Terminal
181