Huawei LUNA2000-2.0MWH-1H0 User Manual page 90

LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual
Figure 4-12 Positions of the copper bars
(1) Desiccant
Step 2 Press and open the battery pack cover on the right side.
Figure 4-13 Opening the battery pack cover
Step 3 Wear insulation gloves and install copper bars between battery packs.
● Pre-install nuts according to the recommended torque of 27 N·m.
● Verify the torque of the installed nuts using a torque wrench set to 27 N·m.
● Mark the nuts whose torque has been verified using a marker.
● Use an extension rod for the torque wrench.
Issue 02 (2021-11-15)
CA UTION
Copyright © Huawei Technologies Co., Ltd.
(2) Copper bar
4 Installation
82