Management of the Authentication Method
NOTE:
CUSA/ CEL only:
Picture Login is an License Management(LMS) option (an option that requires activation).
When using Picture Login, it is necessary to access License Management(LMS) and activate Picture Login, and then change the
setting value of the following service mode to 1 (enabled).
• COPIER > OPTION > FNC-SW > PICLOGIN
If the setting shown above has not been configured, "Picture Login" is not displayed as the authentication method.
Change Login Services Procedure
1. Log on to SMS, click [ Enhanced System Application Management ].
2. Click [SWITCH] for the login service to be used.
3. When login service application you have selected turns to Start after Restart, restart the device.
11
2. Authentication