Using Usb Devices - Canon imageRUNNER ADVANCE System V3.13 Service Manual

CAUTION:
Do not execute [Initialize All Data/Settings] in [Settings/Registration] during the period from backup to recovery of the data.
When [Initialize All Data/Settings] is executed, the key used to combine encrypted backup data (SMS password, etc.) is
initialized, which makes it impossible to combine the data.
It means that SMS cannot be accessed even when the backup data has been recovered.
If you inadvertently executed [Initialize All Data/Settings] and can no longer access SMS, the SMS login password needs
to be initialized by following the procedure shown in
manual.
● Procedure for Backing Up/Restoring the MEAP Application Area
For information on backing up/restoring the MEAP data, refer to
119.

Using USB Devices

■ USB Driver
● Two types of USB drivers
With this device, both a dedicated USB driver for installing MEAP applications (hereinafter referred to as "MEAP driver") and a
USB system driver (hereinafter referred to as "system driver") can be used.
System driver and MEAP driver cannot be used together. When either of them is used, the other driver cannot be used.
● USB driver setting
System driver is active by default in iR-ADV series.
The driver can be changed in [Settings/Registration].
Usually, It is not necessary to change the setting because it is specified in the MEAP application side.
Only in the case of a special MEAP application, it is necessary to change the USB driver setting.
For details, refer to specifications of MEAP application side.
"Backup and Restoration Using Download Mode" on page 119
"Backup and Restoration Using Download Mode" on page
98
6. MEAP Application Management
in this