Authentication Settings; Configuring Picture Login - Canon imageRUNNER ADVANCE System V3.13 Service Manual

Authentication Settings

The settings of the login method or authentication database can be configured on the [Authentication Management] screen.
In this machine, a combination of login service, login method, and authentication database is specified. A combination can be
configured on the Authentication Management screen.
For details, see [Top] > [Managing Users] > [Configuring the Personal Authentication Management Settings] > [Configuring the
Authentication Functions] in the User's Guide found at the following URL.
https://oip.manual.canon/
NOTE:
The default settings are as shown below.
• Login service: User Authentication
• Authentication method: Keyboard Authentication
• Authentication: Local Device
CAUTION:
To ensure a high level of security, it is recommended to change the user name of the Local Device Authentication
administrator and its password from the default as soon as you have started using User Authentication.
Because a department ID and password are not assigned to domain users, distributing setting data where department ID
is enabled to a device where server authentication is enabled could prevent users from logging in to the device.

Configuring Picture Login

Since Picture Login is provided as a system option, it requires management different from that for User Authentication and
Department ID Authentication.
■ Enabling Picture Login (CUSA/ CEL Only)
In order to use Picture Login on the host machine, it is necessary to access License Management(LMS) and activate Picture
Login, and then set the following service mode to "enabled" (setting value: 1).
• COPIER > OPTION > FNC-SW > PICLOGIN
13
2. Authentication