Assembling The Kubbe Attachment; Assembling The Biscuit Attachments - Silvercrest SFW 250 B1 Operating Instructions Manual

Assembling the kubbe attachment

Unfold the fold-out side. There you will fi nd the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing
meat grinder".
2) Disassemble any attachments that might be fi tted and clean the meat grinder
casing 5.
NOTICE
► For the kubbe attachment
required! If need be, remove them both from the meat grinder casing 5.
3) Coat all metal parts with cooking oil.
4) Insert the two plastic parts of the kubbe attachment
on the kubbe attachment e lies on the securing fi tment in the meat grinder
casing 5.
5) When everything has been attached correctly, screw the ring clamp
on hand-tight.
6) Assemble the meat grinder casing
meat grinder".

Assembling the biscuit attachments

Unfold the fold-out side. There you will fi nd the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing
meat grinder".
2) Disassemble any attachments that might be fi tted and clean the meat grinder
casing 5.
NOTICE
► For the biscuit attachment
required! If need be, remove them both from the meat grinder casing 5.
3) Coat all metal parts with cooking oil.
4) Pull the pattern strips
5) First place the plastic disc and then the metal disc of the biscuit attachment
into the meat grinder casing 5 (see fold-out side). Insert the biscuit attach-
ment 1 so that the indentation on the biscuit attachment 1 lies on the
securing fi tment in the meat grinder casing 5.
6) After everything has been correctly assembled, screw the ring clamp
back on hand-tight.
SFW 250 B1
5 as described under "Assembling the
e, the cross blade 8 with the spring 7 is not
5 as described under "Assembling the
5 as described under "Assembling the
1, the cross blade 8 with the spring 7 is not
1 away from the front of the biscuit attachment 1.
e so that the indentation
0 back
1
0
GB
IE
7