Table of Contents
Advertisement
TeamPoS 3000 XT
Chapter 5 - Installation
Caution: Confirm that the external power source is 100-240 VAC before
starting the operation. To prevent electric shock, confirm that the AC cable is
removed from the AC outlet anytime the panels are removed. Be sure to
observe all ESD precautions and power OFF procedures.
The TeamPoS 3000 XT ships completely assembled (with the exception of options). The
following tasks are required for installing the unit:
• Install any options
• Connect peripherals
• Connect power.
Caution: With the exception of USB peripherals, never disconnect or
connect a peripheral while power is on its port. To avoid damage to the
control unit and peripherals, when connecting and disconnecting RS232
peripherals, turn power OFF with the Port switch, the TeamPoS 3000 XT
power switch on the left side of the unit or by disconnecting AC power.
5.1. Installing Options
Two options can be installed on the LCD: an MSR and MSR with keyboard. An additional
display can also be installed. Procedures for their installation are provided in the following
sections.
D900000172
Installation and Maintenance Manual
5-1
Advertisement
Table of Contents
