TeamPoS 3000 XT
7.3.4.
Replacing the Motherboard Fan
To replace the fan on the motherboard:
1. Remove the AC cord from the back of the terminal.
2. Remove the motherboard as described in section 7.3.1, steps 1 – 6.
3. Disconnect the fan connector.
Fan Connector
Figure 7-8. Removing the Fan Bracket from the Motherboard
4. Remove the fan bracket from the motherboard by removing two screws.
5. Remove the fan from the bracket by removing four screws.
Remove 4 screws
6. Attach the new fan to the bracket using the four screws removed in the previous step.
7. Attach the bracket to the motherboard using the screws removed in step 4.
8. Reconnect the fan connector removed in step 3.
9. Replace the motherboard into the chassis.
7-10
Remove 2 screws
Figure 7-9. Removing the Fan from the Bracket
Installation and Maintenance Manual
D900000172