Husqvarna DC 655 Operator's Manual page 13

1. Open the clamp locks.
2. Loosen the clamps.
3. Extend the 2 handles on the dust container.
4. Obey local regulations for disposal of the contents of
the dust container.
To discard a full BigBag and install a new
BigBag bag
WARNING:
caution, a full BigBag can be heavy. Make
sure that the cable ties are closed correctly
before you lift the BigBag.
WARNING:
protection when you empty the dust
collector. Refer to
equipment on page 7 .
2061 - 001 - 13.02.2023
Lift the BigBag with
Use approved respiratory
Personal protective
1. Move the dust outlet handle to the closed position
(A).
2. Remove the funnel of the BigBag from the dust
outlet and close it.
3. Pull the BigBag off the support plate.
4. Obey local regulations for disposal of the full BigBag
bag.
5. Install the funnel of the BigBag (E) on the dust outlet
(C).
C
D
E
6. Attach the funnel of the BigBag on the dust outlet
with cable ties (D).
A
B
13