Husqvarna DC 655 Operator's Manual page 7

obtained about the surface to be treated and take
proper precautions for the work to be performed.
Noise safety
WARNING:
instructions that follow before you use the
product.
• High noise levels and long-term exposure to noise
can cause noise-induced hearing loss.
• To keep the noise level to a minimum, do
maintenance on and operate the product as given
in the operator's manual.
• Use approved hearing protection while you operate
the product.
• Listen for warning signals and voices when you use
hearing protection. Remove the hearing protection
when the product is stopped, unless hearing
protection is necessary for the noise level in the work
area.
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
• Always use approved personal protective equipment
when you operate the product. Personal protective
equipment cannot fully prevent injury but it
decreases the degree of injury if an accident does
occur. Let your dealer help you select the correct
personal protective equipment and when to use
them.
• Regularly do a check of the condition of the personal
protective equipment.
• Use approved hearing protection.
• Use approved respiratory protection.
• Use approved eye protection with side protection.
• Use protective gloves.
• Use boots with steel toe-cap and non-slip sole.
• Use approved work clothing or equivalent close-
fitting clothing that has long sleeves and long legs.
Work area safety
WARNING:
instructions that follow before you use the
product.
• Do not use the product in fog, rain, strong winds,
cold weather, risk of lightning or other bad weather
conditions.
• Keep children, bystanders and animals away from
the work area and at a distance of minimum 5 m
from the product.
• Make sure that only approved persons are in the
work area.
2061 - 001 - 13.02.2023
Read the warning
Read the warning
Read the warning
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Make sure that rough surfaces, for example welded
seams or floor joints, do not stop the product.
• Make sure that there are no cables or hoses in the
operation direction of the product.
• Make sure that there is sufficient airflow in the work
area.
• Make sure that there are no flammable liquids in the
work area.
• This appliance is not suitable for use in classified
(hazardous) locations, to pick up dusts or liquids of
high explosion risk, nor mixtures of combustible dust
with liquids.
• Do not pick up anything that is burning or smoking,
such as cigarettes, matches, or hot ashes.
• Do not use to pick up flammable liquids, such as
gasoline, or use in areas where flammable vapors
may be present.
Electrical safety
WARNING:
shocks from electrical products. Do not use
the product in bad weather conditions. Do
not touch lightning conductors and metal
objects. Always use the product as given in
this operator's manual to prevent injury.
WARNING:
with RCD (residual-current device). An RCD
decreases the risk of electrical shock.
WARNING:
unprotected parts in the power unit. Always
disconnect the power plug before you open
the door to the electrical box.
WARNING:
on the machine for purposes specified in the
instructions.
CAUTION:
the product or generator must be sufficient
and constant to make sure that the motor
operates without problems. Incorrect voltage
causes the power consumption and the
temperature of the motor to increase until
the safety circuit releases. The dimension
of the power cord must agree with national
and local regulations. The dimension of the
mains socket must agree with the amperage
for the electrical socket and extension cable
of the product.
If the power mains has higher system
resistance, short voltage drop can occur
There is always a risk of
Always use a power supply
High voltage. There are
Only use the socket outlet
The power supply from
7