Husqvarna DC 655 Operator's Manual page 17

General product
maintenance
Make sure that the
dust extraction hose
is correctly installed.
Dispose dust of the
product.
Do a check of all
safety devices.
Clean the filters of
the compressor. Re-
place if it is necessa-
ry.
Clean the filter of the
water separator. Re-
place if it is necessa-
ry.
Make sure that nuts
and screws are tight.
Do a check of the V-
belt tension.
Replace the filters of
the compressor.
Replace the filter of
the water separator.
Clean the top section
of the filter unit.
Do a complete serv-
icing and cleaning of
the product.
To clean the product
• Always clean all the equipment after use. Use a
vacuum cleaner.
• Do not use a high-pressure washer to clean the
product.
• Keep the air openings clean and clear to make
sure that the product always has sufficiently cool
temperature.
To clean the compressor filters
CAUTION:
washer or water to clean the compressor
filters. Do not hit the filters with force to
clean them.
2061 - 001 - 13.02.2023
Weekly
Daily
X
X
X
X
Do not use a high-pressure
After 200 h of operat- 12 h after
ing time servicing
X
1. Remove the 2 caps and the 2 compressor filters (A).
2. Clean the 2 compressor filters with a small dust
extractor (B).
Each 3
months
*
X
X
O
A
B
Yearly
X
O
17