Husqvarna DC 655 Operator's Manual page 14

7. Make sure that the BigBag sits evenly on the support
plate.
8. Move the dust outlet handle to the open position (B).
To install a new Longopac dust bag
WARNING:
filters before you replace the Longopac dust
bag.
14
A
B
Always clean the primary
1. Put the Longopac dust bag in the holder.
2. To attach the Longopac dust bag holder, twist the
Longopac dust bag holder until the pins engage in
the slots.
3. Pull the Longopac bag up from the holder and put it
around the container.
2061 - 001 - 13.02.2023