Table of Contents
Advertisement
Reader status and access status
The reader status indicates the status of the reader at the current time.
Table 8- 1
Icon
Start
Stop
Edit
Adapt
The access status indicates the status of the WBM at the current time.
Table 8- 2
Icon
Red padlock
Blue padlock
Red/gray padlock
Green padlock
Standard views
The standard view allows you to switch between standard and extended view. In the
standard view, operator controls are grayed-out if they are not required for standard
applications. If the standard view is disabled, extended parameters are enabled for editing.
SIMATIC MV500
Operating Instructions, 05/2019, C79000-G8976-C494-02
Reader status
Description
The reader has the status "Start". This means that the device is currently
in processing mode (RUN).
The reader has the status "Stop". This means that the device is currently
neither in processing mode nor in productive operation. There is no oper-
ation (STOP).
The reader has the status "Edit". This means that the device is currently in
edit mode and configuration changes can be made.
The reader has the status "Adapt". This means that the device is currently
in adaption mode. This mode is started either by the "READ" button or by
the "Full program" function in the program step "Overview > Auto-
adaption".
Access status
Description
With "Read-only" status, no operation is possible because the WBM of
another PC has control over the optical reader.
The logged on user is not authorized to change settings.
DISA is active. Only users who have the "Take control" right are able to
take control of the optical reader from the controller.
The currently logged on user has taken control of the optical reader.
Operator control and monitoring
101
Advertisement
Table of Contents
