Table of Contents
Advertisement
Network and system integration
4.5 System setup via the RS-232 interface
4.5
System setup via the RS-232 interface
①
②
Figure 4-4
System characteristics
● The results of the optical reader are output to the controller via the RS232 interface.
● The optical reader is triggered either via digital I/O, RS232 or via the built-in auto-trigger
function.
● A PC/programming device is connected via Ethernet for the adjustment procedure.
58
Optical sensor or light barrier (for trigger signal)
Object with code
Example: System configuration via the RS232 interface
Operating Instructions, 05/2019, C79000-G8976-C494-02
SIMATIC MV500
Advertisement
Table of Contents
