NEC Express5800/R120g-1E Maintenance Manual page 191

Chapter 3 Appendix
Error Message
AE83 CPU1_DIMM3 with error is
enabled.
AE84 CPU1_DIMM4 with error is
enabled.
AE85 CPU1_DIMM5 with error is
enabled.
AE86 CPU1_DIMM6 with error is
enabled.
AE87 CPU1_DIMM7 with error is
enabled.
AE88 CPU1_DIMM8 with error is
enabled.
AE8D CPU2_DIMM1 with error is
enabled.
AE8E CPU2_DIMM2 with error is
enabled.
AE8F CPU2_DIMM3 with error is
enabled.
AE90 CPU2_DIMM4 with error is
enabled.
AE91 CPU2_DIMM5 with error is
enabled.
AE92 CPU2_DIMM6 with error is
enabled.
AE93 CPU2_DIMM7 with error is
enabled.
AE94 CPU2_DIMM8 with error is
enabled.
B000 Expansion ROM not
initialized
B001 Expansion ROM not
initialized - PCI Slot 1B
B004 Expansion ROM not
initialized - PCI
Slot 1C
Cause
An error in CPU1_DIMM3 was
detected, but because all memory
is currently disabled, this DIMM
was forcibly enabled.
An error in CPU1_DIMM4 was
detected, but because all memory
is currently disabled, this DIMM
was forcibly enabled.
An error in CPU1_DIMM5 was
detected, but because all memory
is currently disabled, this DIMM
was forcibly enabled.
An error in CPU1_DIMM6 was
detected, but because all memory
is currently disabled, this DIMM
was forcibly enabled.
An error in CPU1_DIMM7 was
detected, but because all memory
is currently disabled, this DIMM
was forcibly enabled.
An error in CPU1_DIMM8 was
detected, but because all memory
is currently disabled, this DIMM
was forcibly enabled.
An error in CPU2_DIMM1 was
detected, but because all memory
is currently disabled, this DIMM
was forcibly enabled.
An error in CPU2_DIMM2 was
detected, but because all memory
is currently disabled, this DIMM
was forcibly enabled.
An error in CPU2_DIMM3 was
detected, but because all memory
is currently disabled, this DIMM
was forcibly enabled.
An error in CPU2_DIMM4 was
detected, but because all memory
is currently disabled, this DIMM
was forcibly enabled.
An error in CPU2_DIMM5 was
detected, but because all memory
is currently disabled, this DIMM
was forcibly enabled.
An error in CPU2_DIMM6 was
detected, but because all memory
is currently disabled, this DIMM
was forcibly enabled.
An error in CPU2_DIMM7 was
detected, but because all memory
is currently disabled, this DIMM
was forcibly enabled.
An error in CPU2_DIMM8 was
detected, but because all memory
is currently disabled, this DIMM
was forcibly enabled.
Failed to expand option ROM.
Option ROM expansion in PCI slot
1B failed.
Option ROM expansion in PCI slot
1C failed.
Express5800/R120g-1E Maintenance Guide
1. POST Error Message
Solution
Contact your sales representative.
Disable expansion of option ROM of the
option board that is not used for OS boot.
Run SETUP, and select Advanced → PCI
Configuration → PCI Device Controller and
Option ROM Settings → PCIxx Slot Option
ROM → Disabled. (xx: PCI slot number)
191