NEC Express5800/R120g-1E Maintenance Manual page 201

Chapter 3 Appendix
BMC Message on Lower LCD Line
Node Manager Firmware Image
execution Failed
Node Manager Firmware Flash Erase
Error
Node Manager Firmware Flash
Corrupted
Node Manager Internal Error
Node Manager can't communicate
BMC
Node Manager Manufacturing Error
Node Manager Persistent Storage
Integrity Error
Drive 0 Fault
Drive 1 Fault
Drive 2 Fault
Drive 3 Fault
Drive 4 Fault
Drive 5 Fault
Drive 6 Fault
Cause
Abnormality in Node Manager
occurred.
Operation was performed during
hard disk drive failure
Express5800/R120g-1E Maintenance Guide
1. POST Error Message
Solution
Turn off the power, wait for at least 30
seconds, and restart the server.
If this does not resolve the problem,
contact your sales representative.
Turn off the power, wait for at least 30
seconds, and restart the server.
If this does not resolve the problem,
contact your sales representative.
201