Table of Contents
Advertisement
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0523
User Action:
Information only; no action is required
• FQXSPUN2020I: Sensor [SensorElementName] has deasserted the transition to non-recoverable
from a less severe state.
This message is for the use case when an implementation has detected that the Sensor transition to non-
recoverable from less severe has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0525
User Action:
Information only; no action is required
• FQXSPUN2023I: Sensor [SensorElementName] has deasserted the transition to non-recoverable.
This message is for the use case when an implementation has detected that the Sensor transition to non-
recoverable has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0531
User Action:
Information only; no action is required
• FQXSPUN2030I: Device [LogicalDeviceElementName] has been removed from unit
[PhysicalPackageElementName].
This message is for the use case when an implementation has detected a Device was removed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0537
User Action:
Information only; no action is required
• FQXSPUP0007L: Invalid or Unsupported firmware or software was detected on system
[ComputerSystemElementName].
132
ThinkSystem SD650 Dual Node DWC Tray and NeXtScale n1200 DWC Enclosure Messages and Codes Reference
Advertisement
Table of Contents
