Table of Contents
Advertisement
Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPTR4002I
Synchronize time setting by user [arg1]: Mode=Sync with NTP Server,
NTPServerHost1=[arg2]:[arg3],NTPServerHost2=[arg4]:[arg5],
NTPServerHost3=[arg6]:[arg7],NTPServerHost4=[arg8]:[arg9],
NTPUpdateFrequency=[arg10].
FQXSPTR4003I
Synchronize time setting by user [arg1]: Mode=Sync with server
clock.
FQXSPUN0009I
Sensor [SensorElementName] has asserted.
FQXSPUN0017I
Sensor [SensorElementName] has transitioned to normal state.
FQXSPUN0026I
Device [LogicalDeviceElementName] has been added.
FQXSPUN0056I
Sensor [SensorElementName] has deasserted.
FQXSPUN2012I
Sensor [SensorElementName] has deasserted.
FQXSPUN2018I
Sensor [SensorElementName] has deasserted the transition from
normal to non-critical state.
FQXSPUN2019I
Sensor [SensorElementName] has transitioned to a less severe state
from critical.
FQXSPUN2020I
Sensor [SensorElementName] has deasserted the transition to non-
recoverable from a less severe state.
FQXSPUN2023I
Sensor [SensorElementName] has deasserted the transition to non-
recoverable.
FQXSPUN2030I
Device [LogicalDeviceElementName] has been removed from unit
[PhysicalPackageElementName].
FQXSPUP4001I
Flash of [arg1] from [arg2] succeeded for user [arg3] .
FQXSPUP4002I
Flash of [arg1] from [arg2] failed for user [arg3].
FQXSPUP4006I
Auto promote primary XCC to backup is [arg1] by user [arg2] from
[arg3] at IP address [arg4].
FQXSPUP4007I
Violation access to XCC SPI flash is detected and isolated.
FQXSPUP4008I
Violation access to UEFI SPI flash is detected and isolated.
FQXSPUP4010I
Flash [arg1] of [arg2] from [arg3] succeeded for user [arg4] .
FQXSPUP4011I
Flash [arg1] of [arg2] from [arg3] failed for user [arg4].
FQXSPWD0000I
Watchdog Timer expired for [WatchdogElementName].
FQXSPWD0001I
Reboot of system [ComputerSystemElementName] initiated by
watchdog [WatchdogElementName].
FQXSPWD0002I
Powering off system [ComputerSystemElementName] initiated by
watchdog [WatchdogElementName].
FQXSPWD0003I
Power cycle of system [ComputerSystemElementName] initiated by
watchdog [WatchdogElementName].
FQXSPWD0004I
Watchdog Timer interrupt occurred for [WatchdogElementName].
FQXSPBR4001I
Running the backup Management Controller [arg1] main application.
FQXSPCA0007J
Numeric sensor [NumericSensorElementName] going high (upper
non-critical) has asserted.
22
ThinkSystem SD650 Dual Node DWC Tray and NeXtScale n1200 DWC Enclosure Messages and Codes Reference
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Warning
Warning
Advertisement
Table of Contents
