Table of Contents
Advertisement
Need thermal team input
• FQXSPPU0002G: The Processor [ProcessorElementName] is operating in a Degraded State.
This message is for the use case when an implementation has detected a Processor is running in the
Degraded state.
Severity: Warning
Serviceable: Yes
Automatically notify Support: No
Alert Category: Warning - CPU
SNMP Trap ID: 42
CIM Prefix: PLAT CIM ID: 0038
User Action:
1. Please check power status.
2. Turn off the existing application that you are running and wait for 10 mins to monitor the device be
back to normal.
3. If the problem still exist, please reboot the system.
4. Contact local service to solve the issue if the probme still exist.
• FQXSPPU0003N: [ProcessorElementName] has Failed with IERR.
This message is for the use case when an implementation has detected a Processor Failed - IERR
Condition.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - CPU
SNMP Trap ID: 40
CIM Prefix: PLAT CIM ID: 0042
User Action:
1. Please collect system event log to repository device or deive to save for local service to investigate.
2. Please reboot the system.(AC off )
3. If the problem still exist, please provide the saved data to local serivce.
• FQXSPPU2000I: [ProcessorElementName] in slot [SlotElementName] has been removed.
This message is for the use case when an implementation has detected a Processor has been Removed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: PLAT CIM ID: 0035
User Action:
Information only; no action is required
• FQXSPPU2001I: An Over-Temperature Condition has been removed on [ProcessorElementName].
This message is for the use case when an implementation has detected a Over-Temperature Condition
has been Removed for Processor.
90
ThinkSystem SD650 Dual Node DWC Tray and NeXtScale n1200 DWC Enclosure Messages and Codes Reference
Advertisement
Table of Contents
