Fujitsu ApeosPrint C4030 Reference Manual page 100

[IPsec Settings]
Sets to ensure safe communication by encrypting the network in packet units.
Note
If the Wireless LAN Kit (optional) is installed, this item can only be specified for the primary network.

Check with the network administrator regarding [IKE Authentication Method], [Preshared Key], [DH

Group] and [PFS Settings].
Item
[IPsec Settings]/[IPsec Settings (Ethernet 1)]/[IPsec Settings (Wi-Fi)]
[IKE Authentication
Method]
[Preshared Key]
[Device Certificate]
[IPsec Communication]
[IKE SA Lifetime]
[IPsec SA Lifetime]
[DH Group]
[PFS Settings]
[Destination IPv4
Address]
[Destination IPv6
Address]
[Communicate with
Non-IPsec Devices]
100
5 Device
Sets IKE authentication method.
Input preshared key.
Set when [IKE Authentication Method] is [Authenticate by
Preshared Key].
Sets certificate used in IPsec communication.
Set when [IKE Authentication Method] is [Authenticate by Digital
Signature].
Here, a self-signed certificate created with Internet Services cannot
be used.
Enables IPSec communication.
Sets valid period of IKE SA.
Sets valid period of IPsec SA.
Sets DH group.
Enables PFS.
Sets IPv4 address or range of destinations for allowing
communication.
Sets IPv6 address or range of destinations for allowing
communication.
Enables communication with devices not supported by IPsec, at
addresses other than those set with the destination address.
Description