Fujitsu ApeosPrint C4030 Reference Manual page 186

Item
Ejection command
Scale
Scale mode
Area determination
mode
Paper margin
Extension
specification
Extension
Form composition
Note
This is not reflected

if extension
command is sent.
Bypass paper supply
pause
186
10 Appendix
Item Number
ESC PCL HP
- - 152
(SP)
- - 153
(SP0)
- - 154
(NR)
- - 155
(FR)
- - 156
(PG)
- - 157
(AF)
- - 158
(AH)
- - 159
- - 160
- - 161
- - 162
62 - -
63 - -
64 - -
67 - 165
Specification value
[0]: OFF
[1]: ON
Note
 You can specify the command to indicate the end
of drawing.
Drawing is ended when the command specified

here is received, and paper is ejected.
 If multiple commands are specified, drawing is
ended and paper is ejected when any of the
commands is received.
[0]: OFF
[1]: ON
[0]: Paper size
[1]: Object area
[0]: Auto
[1]: PS
[2]: IW
[3]: IP
[4]: Adapted
[0] to [99]: 0 to 99 mm
[0]: Invalid
[1]: Valid
Note
Regular extension commands specify ESC, which is

1BH in hexadecimal notation, in the beginning,
followed by ";" (semicolon = 3BH) as the extension
to identify commands. If ESC codes and semicolons
cannot be used on the host computer, specific
alternate character strings can be used as
extensions.
[&%]: 0x21 to 0x7e
Note
In order to be able to control with text codes,

specify the extension of extension command (first
2 bytes). Enter 2 characters on the keyboard
displayed on the screen.
[0]: None
[1] to [64]: No.1 to No.64
Note
The form name displayed even after the form is

deleted after specifying the form. In this case, the
form is not composed.
[0]: None
[1]: Yes