Fujitsu ApeosPrint C4030 Reference Manual page 180

Item
Paper supply tray
Note
 The number of
trays differs
depending on the
model you use.
Coordinate rotation
Color mode
Note
This setting is valid

for color printers.
Depth mode
Note
This setting is valid

for black and white
printers.
Auto Layout
Palette priority
specification
Number of outputs
2 sided
Binding method if 2
sided
Paper direction
180
10 Appendix
Item Number
ESC PCL HP
3 201 103
- - 104
5 - -
- 216 -
- - 105
- - 105
- - 106
- - 107
8 - 108
- 212 -
12 - 110
- 206 -
- 217 -
19 205 -
Specification value
[0]: Auto
[1]: Tray 1
[2]: Tray 2
[3]: Tray 3
[4]: Tray 4
[5]: Bypass
Note
When this item is set to "Auto" and the paper of

the same size is loaded in multiple trays in the
same orientation, the system administrator sets
the tray priority in [Priority] from the setting
screen of each tray in
Settings].
[0]: 0°
[1]: 90°
[0]: Color
[1]: Black and white
[0]: Auto
[1]: Color
[2]: Black and white
[0]: Color
[1]: Grey scale
[2]: Black pen
[1]: Grey scale
[2]: Black pen
[0]: ON
[1]: OFF
[0]: Command
[1]: Panel
[1] to [250]: 1 to 250
Note
If the client computer specifies the number of

printed copies, the value is reflected and printed.
After printing, the setting on the operation panel
will also be this value. However, the number of
copies specified by the lpd port does not change.
[1] to [999]: 1 to 999
[0]: None
[1]: Opened horizontally
[2]: Opened vertically
[0]: OFF
[1]: ON
[0]: Long side binding
[1]: Short side binding
[0]: Vertical
[1]: Horizontal
> [Device] > [Paper Tray