Fujitsu ApeosPrint C4030 Reference Manual page 74

Note
 The memory capacity of receive buffer (place for temporarily storing data sent from client) can be
changed for each interface to suit the use situation and purpose. If the receive buffer capacity is
increased, then the release of clients responding to each interface may become faster.
Item
[PostScript Memory]
[ART IV, ESC/P, 201H Form
Memory]
[HP-GL/2 Auto Layout
Memory]
[Job Ticket Memory]
[Receiving Buffer - LPD]
[Receiving Buffer - IPP]
[Delete Form]
Individually deletes set forms. Input the form number for each print mode, and delete after checking
the displayed form name.
74
5 Device
Specifies the memory capacity for PostScript.
Sets the memory area for work when you use the ESC/P form.
Note
When storage is installed, the storage is specified and cannot be

changed.
Sets the memory area for work when you use the HP-GL/2 auto
layout feature.
Note
When storage is installed, the storage is specified and cannot be

changed.
Specifies the memory capacity to use for processing the job ticket
(which describes the output number of jobs or post-processing).
Sets whether to execute the spool process. Storage is used for the
receive buffer for the spool process.
Note
 When [No Spooling] is set, you cannot receive the data with the same
interface from other clients during processing the LPD printing.
Depending on the setting of [LPD Print Queue], [Receiving Buffer -

LPD] cannot be changed. Refer to "[Other Settings]" (P.77) for [LPD
Print Queue].
Sets whether to execute the spool process. Storage is used for the
receive buffer for the spool process.
Note
When [No Spooling] is set, you cannot receive the data with the same

interface from other clients during processing the IPP printing.
Description