Fujitsu ApeosPrint C4030 Reference Manual page 174

[Zoom Mode]
[Paper Size]
[Coordinate Area]
[Area Determine Mode]
[Auto]
[IW]
[IP]
[Adapted]
[PS]
Note
The object area is determined in [Adapted] without a command.

[Paper Margin]
You can specify the margin.
[Pen Attributes]
You can specify the setting for the pen to draw the boundary lines for the Hard Clip area.
You can set 16 attributes from [Pen Attributes 0] to [Pen Attributes 15].
[Pen Width]
[Line End]
[Line Intersect]
[Color]
[Density]
174
10 Appendix
Document size is determined based on the drawn object area. Sizes
to be determined are A sizes (6 types from A0 through A5).
Document size is determined based on the starting point of the
drawn object area.
Selected automatically. The priority order is [PS] -> [IW] -> [IP] ->
[Adapted].
Area specified by the last IW command within the data is the object
area.
Area specified by all IP commands is the object area.
Object area is determined automatically.
Area including the area specified by the PS command in the
beginning is the object area.
If reduced by the combination of [Original Size] and [Paper Size], the
pen width is also reduced.
Line width grows thicker from the center of the line.
If the width is 0.0 mm, nothing will be drawn.
You can specify the end shape for the pen.
You can specify how pen lines are processed when connected.
Note
[None] has the shortest processing time and is suitable for checking.

If symbols are specified by symbol mode commands, connection

process is not performed. Symbol mode commands refer to HPGL
commands that specify symbols.
These settings are not valid for characters.

Pen colors are specified with RGB. This setting is available for color
printers.
You can specify the pen intensity. This setting is available for black
and white printers.