Fujitsu ApeosPrint C4030 Reference Manual page 94

[EP Proxy Server Setup]
Sets settings for proxy server for EP connection, when using the EP system for EP-BB multifunction
device management service via the Internet.
This is the same as [Proxy Server List].
Note
There are countries and regions where the EP-BB multifunction device management service is not

available.
Refer
 Refer to our official website for information on the EP-BB multifunction device service.
[Outgoing/Incoming Email Settings]
[POP3 Server Settings]
Note
You can set the POP3 server of Exchange Online which uses Oauth2.0 authentication using Internet

Services.
 You can set only one POP3 server. The settings you made later takes effect.
 If you set the POP3 server of Exchange Online which uses Oauth2.0 authentication, the setting of this
item is not used.
Item
[Server Name / IP Address]
[Port Number]
[Polling Interval]
[Login Name]
[Password]
[POP Password Encryption]
94
5 Device
Input server name or IP address of POP3 server.
Sets port number of POP3 server.
Sets interval for checking POP3 server for Email.
Input name for logging in to POP3 server.
Sets password for POP reception.
Enables password encryption.
Description