Table of Contents
Advertisement
2.
Set [LDAP Referrals] to [Enabled].
3.
Set [LDAP Referral Hop Limit] as needed.
Note
The maximum number of servers that can be connected is the value set for the [LDAP Referral Hop
Limit]. If this is set to "5", up to five trust relationship connections can be made.
With regard to [Login Credentials to Search Entries], users must also be qualified to access the trusted
LDAP server.
From a security feature perspective, connections will not be made to unencrypted trusted domains while
LDAPS is in use.
If Logging In Takes an Excessive Amount of Time, and the Same
User Succeeds and Fails Login Attempts
This can be thought to be due to the following.
The scope for searching LDAP servers is too broad
There are too many entries contained within the search scope
Review [Search Directory Root] and [Search Scope]. For details, refer to "[LDAP Server Settings]"
(P.97).
Additionally, login failures may be avoided by setting a sufficiently long timeout duration for
connecting to the LDAP server for the machine. However, as this will not reduce the time required to
log in, this should only be considered a provisional measure.
Follow the procedure below to set the connection timeout duration.
1.
Tap on
> [Device] > [Network Settings] > [Remote Authentication Server Settings] >
[Authentication System Setup].
2.
Confirm and change the following settings as required.
6.2 Enabling User Authentication
135
Advertisement
Table of Contents
