Follow all general safety guidelines when replacing the PCMCIA board.
Note the special safety guidelines indicated in these instructions.
Fig. 14 Card retainers
MAMMOMAT 3000 Opdima
Service
Register 5
SPB7-230.061.02
Rev. 02
•
Disconnect the cable connections
from the front plate of the board.
•
Open the top cover of the box (refer
to chapter 1).
•
Locate the PCMCIA board.
•
Open the SBUS card retainers.
•
Lift the card from its position.
Carefully lift the corners of the
board to release it from the
connector
•
Remove the board and place it on
the grounded tabletop pad.
Page 16 of 20
05.99
SPS-UD
2
2
Siemens-Elema AB
Solna, Sweden