Siemens MAMMOMAT 3000 Opdima Service Instructions Manual page 31

Read these instructions completely prior to beginning the replacement.
Follow all procedures for removing and installing the disks.
Follow C-MOS guidelines as required.
Use the tools and auxiliary materials recommended here.
Always replace the entire drive. Replacement of soldered parts is not permitted.
Fig. 1 Disk System
Siemens-Elema AB
Solna, Sweden
System Disk
SCSI ID
Seagate
Distribution Disk
SCSI ID
CD-drive
Data Disk
SCSI ID
MO-drive
Register 5 SPB7-230.061.02
Rev. 02 05.99
The Disk System is located in two
boxes:
-
-
sd3
0
The two boxes are connected via a
ST32550WC
50-pin SCSI cable. Each device on
the SCSI bus has a unique address,
the SCSI ID.
sdx
6
CD-drive installed when SW-upgrade
sdy
1
Page 1 of 10
SPS-UD
3
System Disk in the main box
(CPU box).
Data disk in the separate MO unit.
MAMMOMAT 3000 Opdima
3
3
Service