•
Place the new power supply in its place in the box.
•
Move the power supply a few millimeters to the right side to fix it on the bottom.
•
Connect the three power supply plugs (refer to Fig. 3). Notice that each plug has a lock
that keeps it from opening inadvertently.
•
Fasten the screw that fixes the power supply (refer to 1, Fig. 1).
•
Connect the power supply cable to the back of the box.
•
Switch on the system.
•
Ensure that the system is operating properly.
Siemens-Elema AB
Solna, Sweden
Register 5
SPB7-230.061.02
Rev. 02
Page 3 of 4
05.99
SPS-UD
MAMMOMAT 3000 Opdima
Service
4