Toro 68004C Operator's Manual page 19

Note:
Use a wrench to keep the bolt from
spinning.
Hitching a Pintle-Hitch Coupler
Figure 22
Figure 23
Hitching a Pin-Hitch Coupler
g035115
Note:
Use a 19 mm (3/4 inch) or 22 mm (7/8 inch)
hitch pin.
Connecting the Safety Chains to
the Tow Vehicle
1. Pull the safety chain through the slots in the
keyholes, so that the lengths on each side are
equal.
2. Cross both lengths of chain under the tow
pole (under the tongue for end-dump models).
For side-dump models, refer to
end-dump models, refer to
Note:
Crossing the chains decreases the
chances of the front of the machine dropping
to the ground if the hitch does not hold the
connection.
g035164
19
Figure 24
Figure
Figure 26.
g035116
25. For