Table of Contents
Advertisement
•
Ensure that all the guards and shields are securely
in place before operating the machine.
•
If the mixing paddles strike an object or if the
machine starts making an unusual noise or
vibration, shut off the engine, wait for all moving
parts to stop, and empty the drum. Inspect for
clogging or damage. Clean, repair, and/or replace
any damaged parts.
•
Do not change the engine governor setting or
overspeed the engine.
•
Do not operate the machine when there is the risk
of lightning.
Maintenance and Storage
•
Before performing maintenance, do the following:
– Park the machine on a level surface.
– Shut off the engine, disconnect the spark-plug
wire, and wait for all movement to stop before
adjusting, cleaning, or repairing the machine.
– Let the engine cool before performing
maintenance or storing the machine.
– Disengage all power and operation controls.
•
Never lubricate, service, repair, or adjust the
machine with the engine running.
•
Keep equipment materials clear from the muffler
and engine to prevent fires. Clean up oil or fuel
spills.
•
Never allow untrained personnel to service the
machine.
•
Keep your hands, feet, and clothing away from
moving parts. If possible, do not make adjustments
with the engine running.
•
Keep all parts in good working condition and all
fasteners tightened. Replace all worn or damaged
decals.
•
Remove any buildup of grease, oil, or debris from
the machine.
•
Shut off the engine and inspect the machine if
an object enters the drum or causes another
obstruction. Make all necessary repairs before
starting the machine.
•
Do not tamper with safety devices.
•
Chock the tires when storing the machine.
•
Keep all fasteners and hose clamps securely
tightened and all equipment in good condition.
•
Use only genuine Toro replacement parts.
6
Advertisement
Table of Contents
