Flame Explorer Software Tool Revision; Operating Temperatures; Safety Summary; Equipment Environment - ABB Uvisor SF910i User Manual

Integrated safeflame scanner

Table of Contents

About This User Manual

Flame Explorer Software Tool Revision

When this manual is last reviewed, the current revision of the Flame Explorer

software tool will be 7.0.0.

Flame Explorer 7.0.0 is used for SF910i, and is compatible with SF810INT Flame

Scanner series firmware version ≥ C3.004.

Connecting Flame Explorer to SF910i devices loaded with lower firmware release

index might results in mismatching data displayed.

The operating temperature range of the SF910i is reported in

printed on the product label.

For units with ATEX/IECEx certification, the ATEX/IECEx label might report another

temperature range, and this is not the temperature range of the whole product. It is

the temperature range for which the Ex certification of the enclosure is valid.

All components, whether in transportation, operation, or storage must be in a

non-corrosive and static-electricity-safe environment.

Warning potential electronstatic charging hazard - Hazard can only be cleaned with

a damp cloth.

Disconnect power or take precautions to ensure that contact with energized parts

are avoided when servicing. SF910i is powered at a safe voltage (24V

no dangerous internal voltages but the electrical connections of the relay terminal

(J1) can be connected up to 50V

can cause injury or death.

8VZZ005286 B

and, if exposed, present a shock hazard that

Appendix A

and is

) and has

Table of Contents