10 Flame Explorer Software
10 Flame Explorer Software
Flame Explorer is an optional configuration, data trending, and historian software package
that runs on a stand-alone computer. It can be used to assist in the initial setup of the
SF910i and also with monitoring during routine operation.
Flame Explorer can be used on a single SF910i or on a multi-drop RS485 network where
multiple SF910i can be connected. The user can use the Flame Explorer to configure
all SF910i units on a MODBUS network from one location.
With the Flame Explorer, the user can monitor and trend the Measured-Values in real-time.
The user can also track other information like the flame quality. Refer to below figure for
a glimpse of a trend page.
8VZZ005286 B
79