FusionModule2000 Smart Modular Data Center
Maintenance Guide
Figure 6-23 Installing a sliding door magnetic lock
Step 6 Reconnect cables to the magnetic lock based on the labels.
Step 7 Verify that the sliding door magnetic lock can function properly.
----End
6.4.3.5 Replacing a Double-Door Magnetic Lock
Prerequisites
Before disconnecting cables from the double-door magnetic lock, label the cables based on
the corresponding ports.
Impact on the System
The door cannot be controlled by the magnetic lock.
Preparations
Procedure
Step 1 Remove the mounting plate of the magnetic lock cover, as shown in
Issue 05 (2020-03-25)
Tools: Phillips screwdriver, rubber mallet
Material: magnetic lock
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
Figure
6-24.
74